Why You Should Power Flush Your Radiators?

Central heating offers a variety of benefits to every home. The most notable is that it provides hot water to the house. And, with help from the radiators, you also get a warm home safe from the biting cold. After using your central heating for some time, you might notice that the radiators are not as efficient as they were and, they might even have some hot spots.

That is when you need a power flush. However, while the power flush is the only alternative to getting rid of the sludge and scale that causes the radiators to be inefficient, most homeowners still don’t know why they need to have their radiators power flushed once in a while. Here are some of the key reasons why power flushing is important.

3 Reasons to Power Flush Radiators

To clear blockages and remove impurities

When you’re not using the central heating, the water is standing, and sludge settles. The narrow tubes in the radiators also cause sludge to settle and increase corrosion. As a result, over the years, a substantial amount of sludge and debris settles in the radiators hampering the movement of water.

This is why the radiators develop cold spots because the hot water is not able to get over the sludge. By power flushing, you can have these impurities removed and the blockages cleared allowing the water to circulate through the radiator with ease.

Restore efficiency

For the radiator to function, it relies on hot water circulating from the boiler and transferring the heat to the radiators which is then transferred to the room. When the radiator is clogged, hot water is not able to move around the radiator easily and efficiently. Because of this, most of the heat is lost before the water can go through the radiator.

If the waste and impurities have caused a blockage, then there’s no water going into the radiator at all. That means no heat can be transferred into the house. By clearing all the impurities and waste through power flushing, circulation of water can be restored. As a result, the radiators can get back to their job of transferring heat into the room before it’s lost.

To Save Money

Power flushing your radiators can also save you money. When your system is struggling to heat the house, a lot of heat is lost as the water strains to get to the radiator. As a result, you have to run your boiler for long hours which consumes more energy. Also, a lot of energy is wasted as water is trapped in between the blockages.

Once the radiators have been power flushed, the flow of water is restored. Your home gets warm faster and you will also notice that you don’t have to run your boiler for long periods. Because the transfer of heat is more efficient, you save money on your energy bills. Power flushing the radiators also reduces strain and pressure in the system reducing the chances of the system breaking down. So, you also save money on boiler repair costs.

Power flushing the radiators is a critical process in the maintenance and functioning of your radiators and central heating as a whole. It should be carried out once every few years. Not only will your radiators benefit from this process but you will too.

Write a Comment